Sub-critical fouling in a membrane bioreactor for municipal wastewater treatment: experimental investigation and mathematical modelling

Fouling is a major limitation for the application of membrane bioreactors (MBRs) in municipal wastewater treatment; the critical flux concept represents a valid tool for process optimisation in planning fouling control strategies. The paper presents the results obtained on a large pilot MBR equipped with a plate-and-frame ultrafiltration membrane. The experimental assessment of flux criticality was carried out by flux-stepping tests showing the positive impact of liquid temperature on the value of the critical threshold. The reliability of short-term tests was then verified over a long period by determining the time of sustainability, t(sust), of six different sub-critical fluxes ranging between 17 and 30Lm(-2)h(-1). An exponential fitting was observed in terms of fouling rate both before and after t(sust), though fouling after t(sust) is likely to be ascribed not only to cake formation. Finally, a new mathematical formulation was proposed according to the local flux approach to model the sub-critical TMP transients. The model involves both bound and free forms of EPS and, once experimentally calibrated, it provided a fair prediction of the TMP jump.     

Peat swamps at Giral lignite field of Barmer basin,Rajasthan, Western India: understanding the evolution through petrological modelling

International Journal of Coal Science & Technology - The lignite samples collected from Giral lignite field of Barmer basin have been subjected to petrological investigation. The data generated...     

1,2,3-Triazolium-based poly(acrylate ionic liquid)s

Nitroxide-mediated radical polymerization of a tailor-made acrylate carrying a 1,2,3-triazole group with an undecanoyl spacer affords a well-defined (M_n = 7860 g mol⁻¹ and D = 1.39) neutral polyacrylate precursor. A series of 1,2,3-triazolium-based poly(ionic liquid)s (TPILs) is then obtained by straightforward quaternization of the 1,2,3-triazole groups with methyl iodide and subsequent anion metathesis reactions. Among the prepared materials, TPIL with bis(trifluoromethane)sulfonimide anion exhibits low glass transition temperature (T_g = −40 °C), high thermal stability (T_d10 = 325 °C) and anhydrous ionic conductivity of 4 × 10⁻⁶ S cm⁻¹ at 30 °C, as measured by differential scanning calorimetry, thermogravimetric analysis and broadband dielectric spectroscopy, respectively.     

Yield and Quality Characteristics of Rendered Chicken Oil for Biodiesel Production

Whole dead poultry birds obtained from commercial layer farms were assessed for fat in the whole carcass and then dry rendered in three different rendering regimens T₁, T₂ and T₃ (temperature = 120, 130 and 140 °C and shell pressure = 1, 2 and 3 kg/cm² respectively) and the effect on the yield and quality of the rendered chicken oil were studied. The overall fat percentage of the whole dead poultry carcass was 14.55 ± 0.17 % and the fat content of ‘greaves’ was 14.49 ± 0.38 %. In the dry batch rendering trials, the mean overall fat recovery was 24.46 ± 1.19, 26.78 ± 3.14 and 22.42 ± 2.32 % and the overall fat yield was 3.52 ± 1.72, 3.84 ± 0.44 and 3.22 ± 0.33 % of the carcass weight in T₁, T₂ and T₃ respectively. Solvent extraction of fat could recover 96.10 ± 0.14 % of fat from ‘greaves’ which was significantly higher than the mechanical centrifugation method. Among the quality characteristics of the rendered chicken oil (RCO), moisture content ranged from 0.61 % (T₂) to 1.09 % (T₁) and the mean specific gravity was 0.91 at 30 °C. The FFA values of RCO obtained from the T₃ rendering regimen were significantly (p < 0.05) higher than the FFA values of T₂ and T₁. The mean acid value, iodine number, peroxide value, saponification value and unsaponifiable matter present in RCO showed no significant difference. The fatty acid profile and calorific values were studied. The RCO was converted to biodiesel by transesterification and the physico-chemical properties of the biodiesel were studied and compared with the Indian biodiesel specification.     

Synthesis of nanostructured copper hexacyanidoferrate and its application in voltammeteric detection of salbutamol

Nanostructured copper hexacyanidoferrate has been synthesized and characterized using elemental analysis, atomic absorption spectroscopy, thermal and infrared spectral studies. The transmission electron microscopic studies of the synthesized material showed that it consisted of irregular oval and rod shaped particles with a size range 70–100 nm. Nanostructured copper hexacyanidoferrate modified glassy carbon electrode was characterized by cyclic voltammetery and nanostructured copper hexacyanidoferrate–carbon nanotube composite material modified glassy carbon electrode has been used for electrocatalytic oxidation of salbutamol. The electrode modified with composite material was found to reduce the peak potential of oxidation of salbutamol by nearly 90 mV.     

Preparation and functional evaluation of agarose derivatives

A facile microwave‐assisted one‐pot synthesis of sodium carboxymethylagarose and calcium carboxymethylagarose from Gracilaria dura agarose (Ag) has been described. The process is user friendly, and the highest degree of substitution was obtained within 15 min compared with the conventional method, which requires more than 3 h. Solubility and gelling behavior of the modified Ag products were found to be dependent on degree of substitution of the products. The characterizations were done by using Fourier transform infrared spectroscopy, ¹H‐ and ¹³C‐nuclear magnetic resonance spectroscopy, thermogravimetric analysis, scanning electron microscopy, Inductively coupled plasma spectrophotometry (ICP), rheology, conductometer analysis, and DNA gel electrophoresis. These agarose derivatives were easily soluble in water and exhibited low thermal hysteresis, improved conductivity, and improved the DNA resolution ability of the parent G. dura Ag hydrogels. These hydrogels may have potential applications in the areas including electrochemical devices, microbiology, biomedical, and pharmaceuticals fields. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40630.     

Electricity Generation and Wastewater Treatment of Oil Refinery in Microbial Fuel Cells Using Pseudomonas putida

Microbial fuel cells (MFCs) represent a novel platform for treating wastewater and at the same time generating electricity. Using Pseudomonas putida (BCRC 1059), a wild-type bacterium, we demonstrated that the refinery wastewater could be treated and also generate electric current in an air-cathode chamber over four-batch cycles for 63 cumulative days. Our study indicated that the oil refinery wastewater containing 2213 mg/L (ppm) chemical oxygen demand (COD) could be used as a substrate for electricity generation in the reactor of the MFC. A maximum voltage of 355 mV was obtained with the highest power density of 0.005 mW/cm² in the third cycle with a maximum current density of 0.015 mA/cm² in regard to the external resistor of 1000 Ω. A maximum coulombic efficiency of 6 × 10⁻²% was obtained in the fourth cycle. The removal efficiency of the COD reached 30% as a function of time. Electron transfer mechanism was studied using cyclic voltammetry, which indicated the presence of a soluble electron shuttle in the reactor. Our study demonstrated that oil refinery wastewater could be used as a substrate for electricity generation.     

Easy Access to 1‐Amino and 1‐Carbon Substituted Isoquinolines via Cobalt‐Catalyzed C?H/N?O Bond Activation

A green atom‐economical method for the synthesis of highly functionalized 1‐amino and 1‐carbon substituted isoquinolines from the reaction of N′‐hydroxybenzimidamides and aryl ketoximes, respectively, with alkynes via pentamethylcyclopentadienylcobalt(III)‐catalyzed C H/N O bond activation is described. The external oxidant‐free annulation reaction uses the =NOH moiety in N′‐hydroxybenzimidamides or N‐aromatic ketone oximes as the directing group and internal oxidant. This first row transition metal‐catalyzed annulation serves as an efficient alternative for the synthesis of isoquinolines, as water is the only by‐product and expensive noble metals such as rhodium(III), iridium(III), palladium(II), and ruthenium(II) are not required. The reaction proceeds via C H activation, alkyne insertion, reductive elimination, and N O activation.

     

Copper‐Catalyzed C–N,C–O Coupling Reaction of Arylglyoxylic Acids with Isatins

The copper(II)‐catalyzed decarboxylative coupling reactions of arylglyoxylic acids with isatins afford 4H‐benzo[d][1,3]oxazin‐4‐ones via decarbonylation and concurrent C–N, C–O bond formation.

     

Visible Light Photocatalysis on Magnetically Recyclable Fe3O4/Cu2O Nanostructures

Catalysis Letters - Magnetically recyclable visible light photocatalysts for the degradation of critical organic pollutants are an urgent industrial requirement. Nonetheless, one component...